ATI Radeon X1900 Series Preview - Articles / Reviews

Reviews: Hardware

Motherboards | Power Supplies | Memory | Systems | Video Cards

ATI Radeon X1900 Series Preview

Author:
Editor:
Sponsor:
Published:

Kurtis Kronk
Brian
ATI
Jan. 24, 2006

Specifications

<< Previous

Next >>

Test Setup

For our preview, we will be using five popular games for benchmarking: Half-Life 2, Splinter Cell: Chaos Theory, F.E.A.R. First Encounter Assault Recon, Quake 4, and Need for Speed Most Wanted. These games vary greatly in their use of shader effects, and a couple of them are cutting edge in terms of graphics, so our testing should give you a good idea of the performance you can expect in many of the latest games.

The system we are using for benchmarking consists of an ASUS A8N-SLI Preium Socket 939 motherboard which utilizes the nForce4 chipset. An AMD Athlon64 FX-55 is used along with 2 GB of Corsair PC-3200 XMS XL Pro memory running in dual channel (2-2-2-5 timings). Every component of the system is at stock or default speeds set by the manufacturer.

Windows XP was installed onto a freshly formatted Seagate NearLine 500GB SATA hard drive connected via on-chip SATA. All the latest Windows Updates were downloaded and installed. The latest video drivers at the time of testing were installed - Catalyst beta drivers for the X1900 XTX, Catalyst 6.1 for the other ATI cards, and Forceware 81.98 drivers for the NVIDIA cards.

In the video card control panel V-SYNC was disabled and the cards were set to "quality" over "performance." For the ATI cards that means the "Texture Preference" and "Mipmap Detail Level" were both set to "High Quality" while Anti Aliasing and Anisotropic Filtering were custom for each test. For NVIDIA cards, the "Image Settings" slider was set to "High Quality." V-Sync was disabled for all testing. Everything else was left to the default settings.

To ensure the best possible results, we run each benchmark three times for each test and average the results. All of the games we have used for this preview allow us to play a recorded time-demo, which prints the average FPS (frames per second) when finished running.

Test Computer:

ASUS A8N-SLI Premium Socket 939 Motherboard (Donated by Directron.com)
AMD Athlon64 FX-55
2 GB Corsair TwinX PC-3200 XMS XL Pro Series (Dual Channels @ 2-2-2-5)
Seagate NearLine 500GB SATA Hard Drive (Donated by Seagate)
Antec TruePower 2.0 550W SLI Certified Power Supply (Donated by Antec)
Windows XP Professional SP2 w/ DirectX 9.0c and latest updates (Donated by Microsoft)

When analyzing the performance graphs on the following pages, I will sometimes refer to settings that offer the best gaming experience. To me, a good gaming experience offers the right mixture of speed and image quality as well as smooth gameplay. Playing a game at 50 FPS with smooth edges and crisp textures would offer a better overall gaming experience than playing at 100 FPS with "jaggies,' noticeable texture filtering and bogging-down in certain parts of the map. Personally, I think 40-50 FPS generally allows for a smooth experience and my comments will stem from that belief. Your opinions may differ.

We'd like to thank Directron.com for donating the ASUS A8N-SLI Premium Socket 939 Motherboard which we used for testing.

<< Previous

Page 4 of 10

Next >>

Page 1: Introduction
Page 2: Introducing the X1900 Series (R580) / Architecture & New Features
Page 3: The Card (X1900 XTX)
Page 4: Test Setup
Page 5: Benchmarks - Half-Life 2
Page 6: Benchmarks - Splinter Cell: Chaos Theory
Page 7: Benchmarks - F.E.A.R. First Encounter Assault Recon
Page 8: Benchmarks - Quake 4
Page 9: Benchmarks - Need for Speed Most Wanted
Page 10: Closing Thoughts

Subscribe to Video Cards [more info]

Add Comment

3 User Comments

1 - Posted by J2T on May 31, 2007 - 5:53 am

??? time warp?

2 - Posted by Kurtis on May 31, 2007 - 12:17 pm

i'm sure there was a spam post, then the spam was deleted, leaving a bumped thread. =]

3 - Posted by J2T on June 1, 2007 - 6:07 pm

haha, excuses excuses :)

Add Comment

To add a comment without being a member, you may omit the password field, but you must enter your name (or nickname) along with your comment. * Denotes required fields.