A search for the best micro ATX cases may seem to be a daunting prospect. To be honest, we do understand those customers who face this sort of phobia. Nowadays the variety of choice is so wide that there is a high chance to get lost in it. But we won’t let you do this. Here is the list of the best micro ATX cases as of today and a short guide on how to choose the best micro ATX case for your needs.
First of all, you have to know what exactly you are looking for. Do you need an average computer chassis or are you going to build a powerful gaming PC?
Another factor which will affect your choice is your budget. Think how much money you are ready to spend on a new micro ATX case. Budget frames will narrow the range of cases you will have to consider and, consequently, this will save your precious time.
The next step is to learn some information about PC cases to know what characteristics you should always take into account. So here is a basic vernacular which will help you to accomplish the pre-cited task and will make your purchase much easier.
What to Consider When Choosing the Best Micro-ATX Case
Full-towers, mid-towers and mini-towers are those form factors which usually support micro ATX boards. This list can be also expanded by desktop and MOD-tower formats.
These are special areas in a case where you can install some additional computer hardware (temperature readouts, fan controllers, platter-style hard drives). Note that they don’t need any tools for installation. The size of drive bays can vary from 2.5 to 5.25 inches.
CPU cooler cutaways
Cooling plays a crucial part in the effective performance of any PC. So if you are going to equip your micro ATX case with the best CPU cooler then check whether it has a backing plate or other mounting hardware (usually installed from the board underneath).
Motherboard tray and standoffs
Placed at the bottom of a computer case, a motherboard tray (a place for a board in your PC case) has special holes for the motherboard standoffs, which help to fix a board and prevent an electrical short.
These are special surfaces inside a PC case used for installation of additional ventilation. Their sizes can vary from 80mm up to 200mm.
Removable air filters
If fan mounts can be found in every PC case, removable air filters aren’t so widely spread. Still, the presence of such filter in your micro ATX case is a great bonus as it takes care of dust reduction inside the chassis.
GPU clearance denotes space required by a graphics processing unit to fit in the case. In a nutshell, there must be enough room inside your micro ATX case to host a chosen GPU. What you should be aware of is that if a GPU clearance has 12 inches and more then it will be able to support almost any video card.
Here the point is that some high-end computer chassis, including micro ATX cases, require special kind of optical drive. This may be either a slim optical drive or a slot-load optical drive. The second type is more relevant for you as it is used in PC cases while the first one is typical for laptops with SFF form factor.
PC case ports
One of the main things about PC case ports is that your motherboard headers must match the ports of your new computer case. In case they don’t, you’ll need to get adapters or expansion cards.
Some other details which should be considered before a purchase include I/O shield, drive sleds and stealthing, expansion slots, cable management and PSU.
There is no doubt that if you want to find the best micro ATX case you should be aware of those pre-cited characteristics before you start searching for a computer chassis. Still, you can make your life easier and just look through our list of best micro ATX cases below.
11 Best Micro-ATX Cases
Corsair Obsidian 350D
Best compact micro ATX case
Corsair Obsidian 350D is the best micro ATX case for those who need something compact and efficient at the same time. Despite its small size this computer chassis is able to host dual hard drives, dual SSDs, dual full-length graphics cards and liquid CPU cooling.
What is more, this micro ATX case has five fan mounts for two 240mm radiators. There are also six expansion bays and five expansion slots. Corsair Obsidian 350D is durable and has a range of awards to prove it.
- compact size
- sturdy construction
- great cable management
- tool-free drive installation
- great airflow
- flimsy 3.5 inch bays
- limited HDD slots
- dust filter needs improvement
Corsair Carbide Air 240
Best spacious micro ATX case
Here is one more representative of Corsair family. Its slap-up cube design can’t but grab your attention. Though most compact PC cases are not aimed at super high performance Carbide Air 240 was designed specifically for this.
Behind its full-size window-panel, you will find enough room optimized for maximum airflow or advanced water-cooling system with up to two 240mm radiators. Carbide Air 240 can also host 9 fans, three of which are already installed, and the range of other high-end components.
- compact and stylish design
- sturdy corpus
- improved cable management
- advanced airflow/cooling configurations
- flimsy side panel
- no CD bay
- plastic drive bays aren’t durable
In Win 301
Classic and Compact ATX Case
The build of this case allows users the option to liquid or air cool the unit while still supporting larger hardware. Perfect for gamers looking for a more compact case. Perfect for people who are building their own pc for the first time.
- Very classy appearance
- The glass panel removes easily without any screws
- Made with tempered glass limiting scratching and damage to the transparent side
- No cable management because the area is too small
- Does not come with any case fans
- Very heavy design can make it hard to maneuver for some users
- Cannot install fans on the right side of the case
Nanoxia Rexgear 1
Easy to Use Micro ATX Cube
Optimized for small form builds, the Nanoxia Rexgear 1 micro ATX cube PC case uses smart component placements that do not block long graphics cards or large radiators. The case is easy to assemble as well as disassemble with removable motherboard trays that allow you to quickly adjust parts as needed.
- Has large amounts of space for a micro ATX
- Several places to install intake and exhaust fans
- Design keeps temperatures very low
- Several design flaws such as the fans intake being blocked by the frame of the case.
- Front fan has the potential to scrape the inside of the case creating unwanted noise.
Nanoxia Deep Silence 4
Best quiet micro ATX case
This micro ATX case will enchant you with its quiet performance. Its fans are designed to balance between advanced cooling options and silence. In addition to two 120 mm Deep Silence fans there is 2-channel fan controller and a dust filter. By the by, you can also fit a water cooling system but to do this you will need to remove the upper two HDD-cages.
- silent performance
- good cooling options
- too little space behind motherboard tray
- installation process is annoying
Thermaltake VERSA H15
Great micro ATX case under $50
Though this mATX case costs less than $40 it was designed for hosting high-end hardware. Thermaltake VERSA H15 is spacious and offers a wide range of ventilation options including cleanable air filter and a perforated mesh bezel for dust-free performance. Easy cable management and tool-free installation make Thermaltake VERSA H15 definitely one of the best micro ATX cases for such low price.
- optimized ventilation
- tool-free installation
- easy cable-management
- low price
- doesn’t support all types of mATX boards
- the boards RAM and the DVD slot are too close
Fractal Design Node 804
Best flexible micro ATX case
This example of best Scandinavian micro ATX case is well-known for its advanced cooling configurations. It has three 120mm fans but can also host several additional fans too. What is more, Fractal Design Node 804 also supports such water cooling components as tall heat sinks with hard drives.
The case is quite flexible, so it can be easily adapted for your specific needs and requirements. There are five expansion slots to support multiple powerful GPU set-ups. Fractal Design Node 804 has a minimalistic design with an elegant, brushed aluminum panel.
- elegant minimalistic design
- optimized for top-notch hardware
- flexible and ultra spacious
- can support multiple GP set-ups as well as radiators
- integrated three step fan controller
- somewhat pricey
- front panel mounting needs improvement
Phanteks Enthoo Evolv
Best durable micro ATX case
Phanteks Enthoo Evolv belongs to the category of expansive micro ATX cases. Still, it’s really worth-buying it if you want to have the best mATX case of today’s market.
This computer chassis is made of sandblasted aluminum with tempered glass panels from the EVOLV line. Thus, this EVOLV ATX Tempered Glass Edition is equipped with great cooling (including water cooling) options and RGB illumination. Phanteks Enthoo Evolv has optimal airflow, clean cable management, removable HDD Cage for installation of long PSU’s and long GPU clearance.
- durable construction
- Tempered Glass Side Panels
- long GPU clearance
- great radiator support
- advanced cooling options
- no 5.25-inch dive bay
- no space for 10.7-inch motherboards
Thermaltake CORE V21 Micro ATX Cube
Best micro ATX case under $100
Another best micro ATX case you can choose for an affordable price is Thermaltake Core V21. This chassis is super flexible and allows externally modular upgrades for dual systems. It can also have either vertical or horizontal motherboard placement.
Furthermore, Thermaltake Core V21 allows you to remove all its panels, what makes installing parts and cable management very easy. Ventilation options are plentiful so there is no need to add any extra fans.
- flexible design
- tool-free installation
- supports dual systems
- can host a long PSU
- interchangeable side, bottom and top panels
- flimsy side panels
- no fan controller
- poor thumbscrews
Cooler Master MasterBox Lite 3.1
Sleek and Modern Design Great for Gaming
With a dark mirror front panel, customizable trim, and transparent side panel, this case is a stunning accessory for any PC gamers tower. Many consumers agree this is a very good case to have.
- Airflow is outstanding
- Case comes with dust filters
- Has a very sleek and modern appearance
- The front panel is transparent but tinted so you can’t see through it unless you have LEDs installed in the unit
- Side panel scratches very easily
- There is a limited amount of space within the case meaning a tight fit for a lot of your hardware
- Does not include SSD mounts
Another great micro ATX case for the money
VIVO CASE-V06 is a budget version of best micro ATX case for gamers as it was designed specifically for this purpose. It has advanced airflow and can host up to three water cooling radiators. What is more, there are five fan mounts.
This mATX chassis has thumb screw mounted side panels for easy access and a large window panel. On the whole, it is very easy to work with and install hardware.
- very light
- easy hardware installation
- flimsy front fans
- poor cable management
- no bay for a DVD/CD/BluRay
As you can see the range of micro ATX cases is really wide – there are cases for any taste. Try to find the best micro ATX case namely for you and enjoy working with it.